Why Does My Bissell Carpet Cleaner Keep Catching On Carpet

Bissell’s carpet cleaners are designed to clean both carpets and hard floors, but they can sometimes get stuck on the carpet. If you have been facing the problem of your Bissell Carpet Cleaner getting stuck on the carpet or hard floor, then don’t worry, as the Cleaningtuts experts are here to help you out.

There can be various reasons for this problem like as the brushes are not rotating properly, there is something blocking the path of the brushes, or the vacuum setting of height isn’t right.

Whatever the reason may be, our expert-tailored solution for the problem will help you find out the exact cause and give you easy-to-follow instructions to fix the problem. So, why wait any longer? Keep reading and get your problem identified in no time.

Common Reasons Why Bissell Carpet Cleaners Catch On Carpet

To start, the reasons your Bissel machine is getting stuck on the carpet can be divided into two perspectives.

First, It’s the vacuum cleaner that’s failing to vacuum properly and getting stuck on the carpet or hard floor.

Second, It’s the carpet is the source of the problem, which doesn’t sound fair to the cleaning job at all. But it’s a fact that your carpet is built with the materials causing the machine to get stuck when you are using a vacuum cleaner over it.

Let’s start with the common reasons concerning the machine why your Bissell carpet cleaner might catch on your carpet.

1. Using the Wrong Vacuum Height Setting for Carpet Cleaning

You have trouble with your Bissel Vacuum every time it’s catching on the carpet. It’s likely that you’re using the wrong vacuum height setting.

The vacuum height setting should be set to “high” when cleaning carpets. If it’s set to “low,” the brush rollers can get caught on the carpet and cause the machine to stop working.

2. Using the Wrong Suction Setting

Sometimes it’s because you are using the wrong suction setting with your Bissel Vacuum Cleaner. The suction setting should be set to low when cleaning carpets.

If it is set to high, the cleaner will likely catch on the carpet and cause damage.

3. The Brush Roll Is Stuck

The first possibility is that the brush roll is stuck. If the brush roll is not rotating, it can cause the cleaner to catch on the carpet.

Another possibility is that there is something caught in the brush roll. If there is something blocking the brush roll from rotating, it can cause the cleaner to catch on the carpet.

The last possibility is that the carpet is not dry. If the carpet is still damp, it can cause the cleaner to catch on the carpet.

4. The Brush Roll Is Not Rotating

The brush roll is responsible for agitating the carpet fibers and cleaning the dirt and debris from your carpet. If the brush roll is not rotating, it can’t do its job properly and will get caught on the carpet. To fix this, simply check the brush roll and make sure it is rotating freely. If it is not, then you will need to replace it.

5. The Belt Is Broken

If the belt is broken, the carpet cleaner will not be able to move properly and will catch on the carpet. To fix this, you will need to replace the belt.

6. The Roller Is Not Placed Properly

If your Bissell carpet cleaner keeps catching on the carpet, it is likely due to the roller not being placed properly. To fix this, make sure that the roller is positioned correctly before starting the vacuum.

7. The Cleaning Solution Is Not Compatible with the Carpet

When you choose to use a vacuum for carpet cleaning, it is important to make sure that the cleaning solution you are using is compatible with the type of carpet you have. If the solution is not compatible, it can cause the cleaner to catch on the carpet, which can lead to damage.

8. The Wrong Type of Carpet Material

If you’re using the new ultra-plush or ultra-soft carpets, that may be why your Bissell vacuum is failing to clean smoothly without getting stuck. The problem is that these “ultra-plush” or “ultra-soft” carpets are built with very thick fibers.

As you vacuum your Bissel over your carpets, the suction creates a tight seal that can make it difficult to move the machine. In some cases, the suction is so strong that you can’t move it at all.

Ways to Prevent Your Bissell Carpet Cleaner from Catching On Carpet

There are a few things that you can do to prevent your Bissell carpet cleaner from catching on the carpet.

Select the Correct Setting

First, make sure that you are using the correct vacuum height and suction setting for your machine. When these settings are correct, your vacuum is equipped with the proper amount of suction and agitation to clean your carpet without damaging it.

Use the Correct Solution

Second, use the correct cleaning solution for your carpet. If you are unsure of what cleaning solution to use, browse the Bissell website or your owner’s manual for the correct info.

Work with a Well-Maintained Bissel Machine

You should make sure that the brush roll is rotating freely. If it is not, you may replace it. Ensure that the belt is in good condition and is not broken. Check whether the roller is placed correctly or not.

When your Bissel Machine is in great condition inside, it’ll work great outside as well. So, take care of your Bissel machine, it won’t let you down.

Choose the Right Carpet

If you have ultra plush or ultra soft carpets, you will have to choose the correct setting of height and suction every time you’re vacuuming over those soft-plush carpets, which over time can become a burden due to changing the setting so frequently.

You can avoid such nuisance by choosing a different type of carpet, and the carpets aren’t difficult to vacuum and causes your machine to get stuck.

How Can I Fix My Bissell Carpet Cleaner If It Still Keeps Catching On Carpet?

If your Bissell carpet cleaner is having difficulty moving over your carpet even after following mentioned solutions to the problem, it’s in your best interest to consult a Bissel professional. Carpet cleaning companies have the knowledge and experience to clean your carpets without damaging them. In addition, they have the proper equipment to get the job done right.

And there’s no fixing of a machine that fails to do the job after getting inspected and fixed. In the end, you can either change the carpet or change the machine.

How Do You Reset A Bissell Carpet Cleaner?

If you have a Bissell carpet cleaner that needs resetting, Follow these instructions in order to accomplish your task.

  • First, make sure that the cleaner is unplugged from the outlet.
  • Next, locate the reset button on the cleaner. It may vary with the model of the machine. It is usually located at the bottom of the unit.
  • Once you have found the reset button, press and hold it for three to five seconds, if the cleaner does not reset, try unplugging it from the outlet and then plugging it back in.
  • Once the cleaner is plugged back in, press and hold the reset button for ten seconds this time.

The machine will reset and be ready to use after you’ve followed the steps.

How Do I Fix the Suction on My Bissell Carpet Cleaner?

It’s happened to all of us. You’re cleaning your carpets with your Bissell carpet cleaner, and the suction just isn’t strong enough. You start feeling like you’re just pushing the dirt around rather than sucking it up. So what can you do to fix the suction on your Bissell carpet cleaner? Keep reading to find out!

There are a few things you can try to fix the suction on your Bissell carpet cleaner without opening it.

  • Check the filters and make sure they are clean. If the filters are dirty, they can restrict the airflow and reduce the suction.
  • Check the hose and make sure it is not kinked or blocked. If the hose is kinked, it can also restrict the airflow and reduce the suction.
  • Check the brush roll and make sure it is not tangled or clogged. If the brush roll is clogged, it can also restrict the airflow and reduce the suction.

Finally, if all of these things check out, you may need to open the cleaner and clean out the inside. It’s best to consult a professional for this task to avoid damaging your cleaner.

Why Won’t My Bissell Pick Up Water?

Although Bissell carpet cleaners are some of the most popular on the market, users sometimes find that their machines do not seem to pick up all of the water. There are a few different reasons for this, and it’s important to understand them so that you can troubleshoot the issue.

Let’s take a look at some of the possible reasons why your Bissell cleaner might not be picking up all of the water and offer some solutions.

Broken Water Tank

The most likely reason your Bissell won’t pick up water is that the dirty water tank is not seated correctly on the unit. Make sure to check that the tank is locked into place and there are no leaks.

Burnt Belt

Another possibility is that the pump belt is broken or not functioning properly. Check to see if the belt is intact and not shredded. If it is, you will need to replace it

Check the Hose

If the belt is intact, then the next step is to check the hose. Disconnect the hose from the back of the machine and check for any kinks or obstructions. If you find any, clear them and reconnect the hose.

Check the Settings

If you have checked the water tank, belt, and hose and everything is in order, then the next step is to check the machine’s settings. There are a few different things you can check, including the following:

  1. The suction level – Make sure the knob is turned up all the way
  2. The height of the brush – Check to see that it is in the correct position for your type of carpet
  3. The width of the brush – Make sure it is set to the widest position

After checking all of these things, your Bissell should be picking up water correctly. If not, then you may have a more serious issue and will need to take it to a professional for repairs.

Frequently Asked Questions

Why Has My Carpet Gone Patchy?

A carpet can lose its original appearance if it’s subjected to heavy traffic, excessive soiling, improper cleaning, or improper maintenance. A carpet’s original appearance can be restored through professional cleaning.

How Do You Get Rid Of Carpet Fibers?

Sweep and then vacuum to remove as much dirt as possible. Use a rotary floor brush on bare floors. Use a soft-bristle brush for carpeted areas. Try vacuuming your carpet with an attachment to a vacuum. You can also purchase special vacuuming attachments at the store.

Why Is My Carpet Darker After Cleaning?

The dirt and grime that was embedded in your carpet fibers have been removed, and the carpet fibers themselves are now darker in color. This is especially common in light-colored carpets, as the dirt and grime can really show up and make the carpet look darker than it actually is.
Sometimes the cleaning solution used to clean your carpet may have left behind a residue that is making the carpet appear darker. But if you try to steam clean your carpet, the heat from the steam can cause the carpet fibers to expand and become darker in color.

Why Are There Lines In My Carpet After Cleaning?

When water dries on the carpet, it can leave behind a residue that will cause visible lines to appear. However, carpeting that has been professionally cleaned will not leave a residue.

Why Does My Carpet Look Worse After Shampooing?

The shampoo residue left in your carpeting is making it look dirty and dingy. Your carpet is absorbing the shampoo, leaving residue behind. Your carpet will become cleaner after shampooing, but it may take 1 to 3 weeks for the color to return to normal.

How Many Times Should I Go Over My Carpet With The Carpet Cleaner?

The more times you go over your carpet with the carpet cleaner, the more dirt and grime will come out of your carpet. So you should constantly go over your carpet with the cleaner. For optimum results, we recommend going over the carpet 3-6 times.

How Many Times Should You Shampoo Carpet?

Unlike sofas and mattresses, you should shampoo your carpets as often as every six months. This is because the oils that cause stains build up in the carpet and stain more easily if not cleaned regularly.

Why My Bissell Carpet Cleaner Stopped Releasing Soap And Water?

If your Bissell carpet cleaner is stopping releasing soap and water, use a lubing substance to loosen the clog. Then, pour a small amount of hot water and vinegar into the machine to clear the clog.

The Bottom Line

Bissell carpet cleaners are a popular choice for many homeowners, but sometimes they can be difficult to operate. We’ve outlined some of the most common reasons why your Bissell cleaner might be catching on your carpet and ways to prevent it from happening. If you still experience this problem after trying these solutions, don’t worry – we have a section at the end of this post with instructions on how to fix it. We hope you find this information helpful!

Every Bissell cleaner is different, so make sure you consult your owner’s manual for specific instructions. Thanks for reading!

Leave a Comment

Your email address will not be published.

Scroll to Top